Dell Latitude D410 User Manual

Page 35

Advertising
background image

a.

 

Align the notch in the module with the slot in the center of the connector.

b.

 

Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove

the module and reinstall it.

 

2.

Replace the

keyboard

.


 

3.

Replace the

center control cover

.

 

Removing the Memory Module from DIMM B

 

1.

Follow the instructions in "

Preparing to Work Inside the Computer

."


 

2.

Turn the computer over, loosen the two captive screws in the memory module cover, and then remove the cover.

 

3.

Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

 

4.

Remove the module from the connector.

NOTICE:

To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.

NOTICE:

Handle memory modules by their edges, and do not touch the components on a module.

NOTE:

If you are replacing a memory module, remove the existing module.

NOTE:

The BIOS daughter card may not be present in all computers.

Advertising