Dell PowerVault TL4000 - Manual (Page 39)

Maintenance
Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C Page 37
From time to time it may be necessary to upgrade the firmware within the bridge. New versions contain
resolutions to known issues as well as new features and improvements to the functionality of the bridge. It is
advisable to check for the latest release on a regular basis.
New version of the firmware can be downloaded from the Dell web site at:
www.dell.com/support.
Once you have downloaded the new firmware to a local disk drive:
• Click on the browse button to locate the file you have downloaded from the website.
• Then click on the update button.
During the update progress of the update can be displayed. This is shown in Figure 29 below.
Figure 29 Firmware update progress page
If for some reason the update was not successful or the user wishes to restart the update process, the user
can click on the ‘Restart Firmware Update’ button after the current update has completed. Once the update
has been completed the iSCSI bridge will require a reboot for the new firmware to take effect.