Dell PowerVault TL4000 - Manual (Page 53)

Appendix C
Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C Page 51
13.4 Step 3 – Targets
Click on the Targets tab.
The devices discovered should now be listed and shown in Figure 38.
Figure 38 Targets Tab
In this example two iSCSI targets have been discovered. The first device is the tape drive, and the second is
the media changer. If no devices are displayed, check the settings used to do the discovery, especially the
CHAP settings then return to Targets tab and click Refresh. If still no devices are displayed, check network
cables and that the iSCSI bridge is operational.
To connect to one of the iSCSI Targets, click on one of the target names and then click the ‘Log on’ button.
In this example we have chosen the first target. A window should appear as in Figure 39.
Figure 39 Connecting to an iSCSI Target