Dell PowerVault TL4000 - Manual (Page 60)

Appendix C
Page 58 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C
To add a new connection to a session, click on the Add button and a new window should appear. This is
shown in Figure 46.
Figure 46 Adding a new connection
Now click on the Advanced button to see the Advanced Settings. This is shown in Figure 47.
Figure 47 Advanced Connections Session
Select the Source IP-address and the Target Portal that you wish to connect too via the pull down menus in
the “Connect by using” section. When setting up multiple connections you ideally want to connect to
different ports and different network interfaces. In this example we have connected to 10.10.10.50/3260 as
the leading connection and the second connection will be 10.10.11.50/3260.