Display cable, Removing the display cable, Replacing the display cable – Dell Inspiron One 19 Touch (Late 2009) User Manual

Page 16

Advertising
background image

 

5.

Connect your computer and all attached devices to electrical outlets, and turn them on.

 

Display Cable

 

Removing the Display Cable

 

1.

Follow the procedures in

Before You Begin

.


 

2.

Remove the display panel (see

Removing the Display Panel

).


 

3.

Turn the display panel over.

 

4.

Lift the conductive tape that secures the display cable to the display-panel connector; press the securing clips on either side of the display-panel
connector and disconnect the display cable.

 

5.

Lift the display cable off the display panel.

 

Replacing the Display Cable

 

1.

Follow the procedures in

Before You Begin

.


 

2.

Slide the display cable into the display-panel connector until it is fully seated and secure the display cable with the conductive tape.

 

3.

Turn the display panel over.

 

4.

Replace the display panel (see

Replacing the Display Panel

).

 

 

5.

Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

 

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Advertising