Dell Inspiron One 19 Touch (Late 2009) User Manual
Page 43
9.
Pivot the processor socket release lever back towards the processor socket, and snap it into place to secure the processor.
10.
Clean the thermal grease from the bottom of the heat sink.
11.
Apply the new thermal grease to the top of the processor.
12.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
13.
Replace the system-board shield (see
Replacing the System-Board Shield
).
14.
Replace the inverter (see
Replacing the Inverter
).
15.
Replace the I/O bracket (see
Replacing the I/O Bracket
).
16.
Replace the back cover (see
Replacing the Back Cover
).
17.
Replace the display bezel (see
Replacing the Display Bezel
).
18.
Replace the speaker cover (see
Replacing the Speaker Cover
).
19.
Replace the decorative cover (see
Replacing the Decorative Cover
).
20.
Replace the optical drive (see
Replacing the Optical Drive
).
21.
Replace the computer stand (see
Replacing the Computer Stand
).
22.
Replace the I/O cover (see
Replacing the I/O Cover
).
23.
Connect your computer and all attached devices to electrical outlets, and then turn them on.
Back to Contents Page
CAUTION:
Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION:
Ensure that the processor heat sink is correctly seated and secure.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.