Dell XC Web-Scale Converged Appliance - Manual (Page 80)

80 Wyse Datacenter Appliance XC for vWorkspace
The remaining settings will vary depending on your network environment and needs. For help
determining what is appropriate, refer to the Using Web Access and Secure Gateway sections of the
vWorkspace Administration Guide.
12.2.2 Installing vWorkspace Client (Connector)
The vWorkspace Connector allows users to establish a connection to the vWorkspace farm and receive a
list of authorized desktops and applications. Several versions exist for different platforms, but this section
describes the installation for vWorkspace Connector for Windows.
Copy the vasclient32 installer file from the vWorkspace installation folder, from the path
vWorkspace_x64\connectors\Windows\vasclient32
.
1. Right-click and click Run as administrator.
2. Click Next.
3. Accept EULA and proceed.
4. Enter customer information and click Next.
5. Click Next again to proceed.
6. Click Next.
7. Click Next.
8. Click OK and install flash, if required.
9. Click Finish and restart your computer, if prompted.
Refer to the vWorkspace Connectors section of the
vWorkspace Administration Guide for information on
configuration settings for the connector client.
12.3 Using Foglight for Virtual Desktops
For information about Foglight for Virtual Desktops, refer to the Foglight for Virtual Desktops
Administrator’s Guide and the Foglight for Virtual Desktops User’s Guide .