Dell XC Web-Scale Converged Appliance - Manual (Page 81)

81 Wyse Datacenter Appliance XC for vWorkspace
13 Adding Hosts
This section describes the tasks to add hosts to the cluster.
13.1 Adding Nutanix Nodes
Refer to the Nutanix Web Console Guide for the procedure to expand an existing cluster.
13.2 Adding MS Failover Cluster Nodes
To add nodes to an existing failover cluster:
NOTE: Microsoft Failover Cluster is required only when the hypervisor is Hyper-V.
1. Start Failover Cluster Manager on an existing node.
2. Right-click Nodes  Add Nodes.
3. In the Add Node wizard dialog box, to select the new servers to be used as nodes, type or
browse through to the server name.
Figure 53 Adding MS Failover Cluster Nodes using Failover Cluster Manager
4. Select No on the Validation Warning page and click Next.
5. Follow the on-screen instructions and add the other nodes.
6. Refer to section 6.3 in this guide to ensure the Placement Paths have been configured properly
in SCVMM for the newly added nodes.