Margin middle – Dell C1765NF MFP Laser Printer User Manual
Page 244
242
Copying
2 Press the
(Copy) button.
3 Press the
button until Margin Left/Right is highlighted, and then press the
(Set) button.
4 Press the
or
button or enter the desired value using the numeric keypad, and then press the
(Set)
button.
NOTE:
Values marked by an asterisk (
*
) are the factory default menu settings.
5 Press the
(Start) button to begin copying.
Margin Middle
To specify the middle margin of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Margin Middle is highlighted, and then press the
(Set) button.
4 Press the
or
button or enter the desired value using the numeric keypad, and then press the
(Set)
button.
NOTE:
Values marked by an asterisk (
*
) are the factory default menu settings.
5 Press the
(Start) button to begin copying.
4 mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch
0 mm*/0.0 inch*
Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch