Dell C1765NF MFP Laser Printer - Manual (Page 265)

Scanning 263
After you configured settings, go to "Sending the Scanned File on the Network" on page 263.
Sending the Scanned File on the Network
1 Load the document(s) face up with top edge in first into the ADF.
OR
4 Sever Name /
IP Address
Enter a server name or IP address of your computer or the FTP server that you have shared out.
IPv4 and IPv6 are both supported.
The following are examples:
• For Computer (SMB):
Server name: myhost
IP address (IPv4): 192.168.1.100
• For Server (FTP):
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address (IPv4): 192.168.1.100
5 Share Name Enter the name of the shared folder on the recipient computer. For SMB only.
6 Path For SMB
To store the scanned document in the share folder directly without creating any subfolder, leave
the space blank.
To store the scanned document in the folder you created under the share folder, enter the path as
following.
Example: Share Folder name, MyShare, Second-level folder name: MyPic, Third-level folder
name: John
You should now see
MyShare\MyPic\John in your directory.
In this case, enter the following item.
Path: \MyPic\John
For FTP
Enter the path to store the scanned document.
7 Login Name Enter the user account name that has access to the shared folder on your computer or FTP
server.
8 Login Password Enter the password corresponding to the above login name.
NOTE: Empty password is not valid in the Scan to Server/Computer feature. Ensure that you have a
valid password for the user login account. (See "Confirming a Login name and Password" on
page 251 for details on how to add a password in your user login account).
9 Confirm Login
Password
Re-enter your password.
10 Port Number Enter the Server Port Number. If you are unsure, you can enter the default value of 139 for SMB
and 21 for FTP.
MyShare (Share folder)
MyPic
John