Back view, Back-panel connectors – Dell OptiPlex GX520 User Manual

Page 60

Advertising
background image

 

Back View

 

Back-Panel Connectors

Windows Device Manager. For more information about sleep modes and
exiting from a power-saving mode, see "

Power Management

."

See "

System Lights

" for a description of light codes that can help you

troubleshoot problems with your computer.

8

hard-drive
activity light

This light flickers when the hard drive is in use.

9

headphone
connector

Use the headphone connector to attach headphones and most kinds of
speakers.

10 microphone

connector

Use the microphone connector to attach a microphone.

1 cover release

latch

This latch allows you to open the computer cover.

2 padlock ring

Insert a padlock to lock the computer cover.

3 voltage

selection
switch

Your computer is equipped with a manual voltage-selection switch.

To help avoid damaging a computer with a manual voltage-selection
switch, set the switch for the voltage that most closely matches the AC
power available in your location.

Also, ensure that your monitor and attached devices are electrically
rated to operate with the AC power available in your location.

NOTICE:

The voltage selection switch must be set to the 115-V

position even though the AC power available in Japan is 100 V.

4 power

connector

Insert the power cable into this connector.

5 back-panel

connectors

Plug serial, USB, and other devices into the appropriate connector.

6 card slots

Access connectors for any installed PCI and PCI Express cards.

Advertising