Cd/dvd drive – Dell OptiPlex GX520 User Manual
Page 82
4.
Attach the power and floppy-drive cables to the floppy drive.
5.
Replace the computer cover
.
6.
Enter system setup
and use the Diskette Drive option to enable your new floppy drive.
7.
Verify that your computer works correctly by running the
Dell Diagnostics
.
CD/DVD Drive
Removing a CD/DVD Drive
1.
Follow the procedures in "
Before You Begin
."
1 floppy drive
2 shoulder screws (4)
3 shoulder screw slots (2)
1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.