Drive-panel inserts – Dell OptiPlex GX520 User Manual
Page 90
Advertising
8.
Attach the serial ATA connector removed in
9.
Locate an unused serial ATA connector on the system board and attach a drive cable to this connector and to the second hard drive.
10.
Replace the computer cover
.
Drive-Panel Inserts
If you are installing a new floppy or CD/DVD drive instead of replacing a drive, remove the drive-panel inserts.
1.
Follow the procedures in "
Before You Begin
."
2.
Remove the drive panel by sliding the drive release latch downward to open the panel. Then remove it from the hinges.
1 hard-drive cable
2 hard-drive cable on system board
3 power cable
Advertising