Setting up your tv display, Proper location for your tv display, Connecting your tv display – Dell W1900 User Manual

Page 11: 2 setting up your tv display

Advertising
background image

Setting Up Your TV Display

11

2

Setting Up Your TV Display

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the

Product Information Guide

.

Proper Location for Your TV Display

Consider the following environmental factors when you are deciding where to put your TV display:

• Do not store or use the TV display in locations that are exposed to high heat, direct sunlight,

or extreme cold.

• Avoid moving the TV display between locations with extreme temperature differences. For

more information, see Specifications on page 39.

• Do not subject the TV display to severe vibration or high impact conditions. Do not place the

TV display inside a car trunk.

• Do not store or use the TV display in locations where the TV display would be exposed to

high humidity or dusty environment.

• Do not place the TV display in a location where water or other liquids could spill on or into

the TV display.

Connecting Your TV Display

Your TV display has four standard connectors that can be used to connect devices.

NOTE:

Before you connect your TV display, ensure you have all the proper cables. Some cables may

come with the device you are connecting. For a list of cables that came with your TV display, see

Package Contents on page 9. To order additional cables, contact Dell.

Quality

Cable and Connector

When to Use

Good

Coaxial (RF) carries the video and audio

from one cable. The coaxial connector is

labeled, ANT/Cable on your TV display. To

locate the connector, see page 8.

Advertising