Dell W1900 - Manual (Page 26)

26 Using the On-Screen Display
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm
D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 1 / 2 2/ 0 4 – FO R PR O O F O N LY
PIP/POP/PBP
You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside-
Picture (POP), or Picture-By-Picture (PBP).
For POP, you can select from three different POP options:
• POP1 — One large POP window to the left and a smaller, centered window on the right.
• POP3 — One large POP window to the left and three smaller, vertically-aligned windows on
the right.
• POP12 — One large, centered POP window surrounded by twelve smaller windows.
The remote control offers the following
PIP/POP/PBP options:
•Use the PIP button or the POP PBP button
on the remote control to turn on and off PIP,
POP, and PBP.
•If you are in PIP, POP, or PBP mode, use the
SWAP button on the remote control to
switch between the two windows.
•Use the
POS button on the remote to
change which corner of the screen the PIP
window appears.
In the OSD, you can adjust the
Transparency, the Size, and H (horizontal)
and V (vertical) position of the PIP/POP/PBP
windows. When you are selecting the horizontal orientation, - moves the window left and + moves
the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the
screen and 100 is at the bottom of the screen.
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected
channels that appear in the windows. Sequential rotates through each window and plays all of the
preselected channels. The rotation runs through all the available channels before it starts again at
the lowest channel.
SIZE
TRANSPARENCY
PIP/POP/PBP
BACK
PIP SOURCE
VERTICAL POSITION
HORIZONTAL POSITION
AUDIOS SOURCE
PIP/POP/PBP
38
38
38
38
PIP
TV
MAIN