Dell W1900 - Manual (Page 14)

14 Setting Up Your TV Display
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
Using the ANT/Cable (Coaxial) Connector
1 Turn off the TV display and unplug the power cord.
2 Connect the coaxial cable to the ANT/Cable connector of the TV display.
3 Plug in the power cord for the TV display and turn on the TV display.
4 Enter the on-screen-display (OSD) and select TV. For additional information about the Input
Select menu, see page 24.
Using the Composite Connector
1 Turn off the TV display and unplug the power cord.
2 Connect your device including the audio cables.
3 Plug in the power cords for the TV display and devices and turn them on.
4 Enter the OSD and select the AV1 (Composite). For additional information about the Input
Select menu, see page 24.