Dell Acceleration Appliances for Databases - Manual (Page 44)

Getting Host Information
_____________________________________________________________________
To get information about ION Accelerator hosts (target system nodes), click the Hosts link in the
Configuration screen. A sample Hosts screen is shown below.
The following columns are displayed:
• Hostname – Name of the ION Accelerator node, as set in First Boot. Clicking this link
displays the ioMemory Configuration page (see the ioMemory Configuration section for
details).
• Host IP – IP address of the ION Accelerator node
• Host OS – Operating system on the ION Accelerator node
• Agent Status – Connectivity status of the ION Accelerator agent: Online, error, or <alert>.
If an error or alert condition is shown, clicking its link displays the Alerts page for details.
• Drives – List of serial numbers for the ioDrives installed in the ION Accelerator node
• Cluster Name – Name of the cluster that this ION Accelerator node is part of. Clicking this
link displays the ION Accelerator Clusters screen.
38