Dell Acceleration Appliances for Databases - Manual (Page 54)

To access Live View,
1. Click the Configuration tab.
2. Click ioMemory at the left of the screen.
3. In the ioMemory screen, click the name of the ioMemory module you want to monitor.
4. Click the Live access tab. The Live Meter View screen appears, with the ioMemory
module selected.
The performance graph works the same way as the one displayed in the Overview tab, with
the added feature of Average bandwidth and IOPS performance over time (shown directly
below the Data and Operations boxes).
Navigating away from the Live tab resets the statistics for the next time the tab is opened.
In addition, the Live View offers several other performance metrics:
• Temperature – Indicates the current operating temperature of the selected ioMemory
device, in degrees Celsius. The right-hand edge of the scale shows the warning and
failure points for high temperatures in the device.
• Current RAM – Shows the maximum amount of RAM allocated to the ION Accelerator
software in this server (host).
• Peak RAM – Shows the highest amount of RAM this ioMemory module has actually used.
• PBW Endurance – Shows the projected lifetime endurance for the ioMemory device.
100% means virtually no reading or writing has occurred. As the NAND flash wears, the
endurance percentage drops until eventually it reaches a warning or failure point at the
left of the scale.
48