Dell Acceleration Appliances for Databases User Manual
Page 91
Alert
Description
Pool is running in a degraded state
due to failed RAID and is rebuilding.
Pool is running in a degraded state due to failed RAID and
is rebuilding.
RAID has no spares and is vulnerable
if a subsequent failure occurs.
Refer to the Knowledgebase, User Guides, or Customer
Support to correct the problem.
Volume is not in sync with its peer.
Check the status of each host in the cluster and reboot or
repair the failed cluster host. Otherwise, refer to the
Knowledgebase, User Guides, or Customer Support to
correct the problem.
Volume is re-synchronizing with its
peer.
Volume is re-synchronizing with its peer.
A port is disconnected.
A port is disconnected.
RAID is running in a degraded state
(not rebuilding).
RAID is running in a degraded state (not rebuilding).
RAID is running in a degraded state
and is rebuilding.
Refer to the Knowledgebase, User Guides, or Customer
Support to correct the problem.
A previously connected port has
been disconnected.
A previously connected port has been disconnected.
Some of the previously connected
ports have been disconnected.
Some of the previously connected ports have been
disconnected.
Chassis cooling is not redundant.
One or more fans do not have a backup. Repair or install
redundant fans.
Temperature near threshold.
The temperature sensor is nearing its threshold. Provide
more cooling to the area.
Non-critical power supply condition.
A non-critical condition is present on the power supply.
Repair or replace the power supply.
Non-critical fan condition.
A non-critical condition is present on the fan. Repair or
replace the fan.
Chassis power is not redundant.
One or more power supplies do not have a backup. Repair
or install redundant power supplies.
Boot RAID is running in a degraded
state (not rebuilding).
Refer to the Knowledgebase, User Guides, or Customer
Support to correct the problem.
85