Dell XPS 730x H2C (Early 2009) - Manual (Page 32)

32
Troubleshooting
For any problem encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and
problem description exactly as it appears and follow the instructions on the
screen. If you cannot resolve the problem, contact Dell (see "Contacting Dell"
on page 72).
NOTE:
The Service Tag for your computer is located at the top of each test screen.
When contacting Dell support, have your Service Tag ready.
The following tabs provide additional information for tests run from the
Custom Test or Symptom Tree option:
MP Memory Test
The MP (Multi-Processor) Memory Test is a sub-set of the Dell Diagnostics
that runs a thorough, hardware-level test of your system memory. If you
suspect a memory issue, run the MP Memory Test using the following
instructions:
1 Turn on (or restart) your computer.
2 When the DELL logo appears, press <F12> immediately.
Tab Function
Results Displays the results of the test and any error conditions
encountered.
Errors Displays error conditions encountered, error codes, and the
problem description.
Help Describes the test and any requirements for running
the test.
Configuration
(Custom Test only)
Displays the hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for
devices from system setup, memory, and various internal
tests, and it displays the information in the device list in the
left pane of the screen.
NOTE:
The device list may not display the names of all the
components installed on your computer or all devices
attached to your computer.
Parameters
(Custom Test only)
Allows you to customize the test, if applicable, by changing
the test settings.
book.book Page 32 Monday, November 10, 2008 1:26 PM