Dell Dimension 5000 User Manual

Page 109

Advertising
background image

Appendix

109

USB for FlexBay

This field enables and disables the internal USB for FlexBay.
Off = Internal USB for FlexBay is disabled.
On = Internal USB for FlexBay is disabled.
The factory default setting is On.

NOTE:

This USB option appears only if a FlexBay device is installed.

LPT Port Mode

Identifies and defines the parallel port settings. You can set the parallel port
to Off, AT, PS/2, EPP, or ECP.

LPT Port Address

Identifies the address for the parallel port.

LPT Port DMA

Identifies and defines the parallel port DMA settings. You can set the
parallel port DMA to Off, DMA1, or DMA3.

Serial Port #1

Identifies and defines the serial port settings. Auto, the default setting,
automatically configures a connector to a particular designation (COM1 or
COM3).

Serial Port #2

(optional)

Identifies and defines the serial port settings. Auto, the default setting,
automatically configures a connector to a particular designation (COM2 or
COM4).

PS/2 Mouse Port

(optional)

Enables or disables the onboard PS/2-compatible mouse controller.

Video

Primary Video

This setting specifies which video controller is primary when two video
controllers are present on the computer.

Video Memory Size

Offering selectable options of 1MB and 8MB, this field configures the
system memory allocation reserved for the integrated video controller.

Performance

HyperThreading

If your computer’s processor supports Hyper-Threading, this option appears
in the Options List.

Hard Drive

Acoustics

• Bypass (default) — Your computer does not test or change the current

acoustics mode setting.

• Quiet — The hard drive operates at its most quiet setting.
• Suggested — The hard drive operates at the level suggested by the drive

manufacturer.

• Performance — The hard drive operates at its maximum speed.

NOTE:

Switching to performance mode will cause the drive heads to move

faster, causing the hard drive to be noisier. However, some drives may not see
an increase in data transfer rates.

NOTE:

Changing the acoustics setting does not alter your hard drive image.

C7565bk1.book Page 109 Wednesday, January 26, 2005 1:37 PM

Advertising