Dell Dimension 5000 - Manual (Page 86)

86
Removing and Installing Parts
www
.dell.com | support.dell.com
3 Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you are installing a PCI Express x16 card, this card may cover the floppy-drive connectors.
Remove this card before connecting the floppy-drive cables .
4 Remove the floppy drive by sliding and holding the drive release latch downward. Then, slide
the drive out of the computer.
power cable data cable
C7565bk1.book Page 86 Wednesday, January 26, 2005 1:37 PM