Dell Dimension 5000 - Manual (Page 78)

78
Removing and Installing Parts
www
.dell.com | support.dell.com
1 Align the tabs slots with the drive-panel insert tabs and seat the drive panel insert under the
right edge.
2 Rotating inward toward the drive panel, align and snap the drive-panel insert into place on
the drive panel.
3 Ensure that the drive-panel insert is correctly seated in the drive panel.
Replacing the Drive Panel.
1 Follow the procedures in "Before You Begin" on page 53.
2 Align the drive panel tabs with the side-door hinges.
3 Rotate the drive panel toward the computer until it snaps into place on the front panel.
4 Grasping the lever, pull the sliding plate to the left, snapping it into the closed position to
secure the drive panel.
drive panel
sliding plate
sliding plate lever
C7565bk1.book Page 78 Wednesday, January 26, 2005 1:37 PM