Procedure – Dell Inspiron Small Desktop (3646, Mid 2014) User Manual
Page 21
Advertising
Procedure
CAUTION: Incorrect alignment of the fan and heat-sink assembly can
damage the system board and processor.
1
Place the fan on the heat-sink assembly as shown in the figure.
2 Align the screw holes on the fan with the slots on the heat-sink assembly.
1
screws (4)
2
fan
3
fan cable
4
optical-drive data cable
5
optical-drive power cable
3 Replace the screws that secure the fan to the heat-sink assembly on the
system board.
4 Connect the power and data cables to the connectors on the optical
drive.
5 Connect the fan cable to the system board connector (FANC1).
For more information on the location of the fan connector, see
.
21
Advertising