Replacing the power-button module, Procedure, Post-requisites – Dell Inspiron Small Desktop (3646, Mid 2014) User Manual
Page 44
Replacing the Power-Button
Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align and push the power-button module tabs into the slots on the front
panel.
2 Align the power-button module cable on the routing guides on the
chassis.
3 Connect the power button module cable to the system board connector
(LEDH1).
For more information on the location of the cable connector, see
Post-requisites
1
Follow the procedure from step 3 to step 6 in “Replacing the
”.
2 Replace the
.
3 Replace the
.
44