Dell Inspiron Small Desktop (3646, Mid 2014) - Manual (Page 41)

Replacing the Front I/O-Panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Insert the front I/O panel clamps into the slots on the front panel.
2 Slide the front I/O panel towards the top. Ensure that the screw hole on
the front I/O panel aligns with the screw hole on the front panel.
3 Replace the screw that secures the front I/O panel to the front panel.
4 Route the front I/O panel cables through the routing guides on the
chassis.
5 Connect the front I/O panel cables to the system-board connectors
(USBF1, USBF2, and AUDIOF1).
For more information on the location of the cable connectors, see
“System-Board Components” .
Post-requisites
1 Follow the procedure from step 3 to step 6 in “Replacing the drive cage ”.
2 Replace the front bezel .
3 Replace the computer cover .
41