Cards, Installing cards – Dell OptiPlex 170L User Manual
Page 100
Back to Contents Page
Cards
Dell™ OptiPlex™ 170L User's Guide
Installing Cards
1.
Follow the procedures in "
Before You Begin
."
2.
Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3.
Unscrew and remove the filler bracket for the card slot you want to use.
4.
Align the cutout on the bottom of the card with the crossbar in the system board connector. Gently rock the card into the connector until it is fully
seated.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
NOTE:
Your Dell computer uses only PCI slots. ISA cards are not supported.
NOTE:
If you are replacing a card, remove the current driver for the card from the operating system.
1 securing screw
2 filler bracket
CAUTION:
Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be
sure to unplug your computer from its electrical outlet before installing any cards.