Replacing the computer cover – Dell OptiPlex 170L User Manual
Page 31
Back to Contents Page
Replacing the Computer Cover
Dell™ OptiPlex™ 170L User's Guide
1.
Ensure that all cables are connected, and fold cables out of the way.
2.
Ensure that no tools or extra parts are left inside the computer.
3.
On the small desktop computer:
a.
Pivot the cover down.
b.
Press down on the right side of the cover until it closes.
c.
Press down on the left side of the cover until it closes.
d.
Ensure that both sides of the cover are locked. If not, repeat
.
4.
On the mini-tower computer, place the cover on the computer and slide the cover toward the front of the computer until it fits completely into place.
5.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before you begin this procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.