Processor, Replacing the processor – Dell OptiPlex 170L User Manual
Page 118
Back to Contents Page
Processor
Dell™ OptiPlex™ 170L User's Guide
Replacing the Processor
1.
Follow the procedures in "
Before You Begin
."
2.
Disconnect the cooling fan power cable from the FAN connector on the system board (see "
System Board Components
").
3.
Disconnect the power cable from the 12VPOWER connector on the system board.
4.
Pull up and rotate the airflow shroud.
5.
Remove the heat sink:
a.
Press the tab on the green securing clip to remove the clip from the retention base.
CAUTION:
Before you begin this procedure, follow the safety instructions in the Product Information Guide.
CAUTION:
The heat sink can get very hot during normal operation. Be sure that the heat sink has had sufficient time to cool before you touch it.
1 securing clip
2 tab