Dell OptiPlex 170L - Manual (Page 95)

14. Plug the fan cable into the FAN connector on the system board.
15. Plug the power cable into the 12VPOWER connector on the system board.
16. Close the computer cover.
17. Attach the computer stand (optional).
18. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
1 heat-sink/blower assembly 4 retention base
2 screw 5 heat sink
3 retention base tab 6 screw
1 securing clip
2 tab
3 slot
4 retention base
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.