Wireless mini-card, Removing the mini-card, 4 disconnect the antenna cables from the mini-card – Dell Inspiron 1428 (Late 2009) User Manual

Page 35

Advertising
background image

Wireless Mini-Card

35

10

Wireless Mini-Card

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 13) before working inside the computer.

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards

from sources other than Dell.

If you ordered a wireless Mini-Card with your computer, the card is already

installed.
Your computer supports one Mini-Card slot:

• one Half Mini-Card slot — for WLAN

NOTE:

Depending on the configuration of the computer when it was sold, the

Mini-Card slot may not have a Mini-Card installed.

Removing the Mini-Card

1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Remove the base cover (see "Removing the Base Cover" on page 33).
4 Disconnect the antenna cables from the Mini-Card.
5 Remove the two screws that secure the Mini-Card to the system board.

Advertising