12 remove the camera module, Replacing the camera module – Dell Inspiron 1428 (Late 2009) User Manual

Page 64

Advertising
background image

64

Camera Module

11 Turn the camera module over and disconnect the camera cable from the

connector on the camera module.

12 Remove the camera module.

Replacing the Camera Module

1 Follow the procedures in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Turn the camera module over and slide the notch on the camera module

into the slot on the display cover.

4 Replace the two screws that secure the camera module to the display cover.
5 Replace the display panel (see "Replacing the Display Panel" on page 54).
6 Replace the inverter board (see "Replacing the Inverter Board" on page 60).
7 Replace the display bezel (see "Replacing the Display Bezel" on page 52).

1

screws (2)

2

camera module

2

1

Advertising