Display bezel, Removing the display bezel – Dell Inspiron 1428 (Late 2009) User Manual

Page 51

Advertising
background image

Display

51

NOTE:

Ensure that you connect the cable to the corresponding L and R connectors

on the system board.

6 Route the Mini-Card antenna cables, and guide the cables to the bottom

of the computer through the cable routing slot.

7 Replace the keyboard (see "Replacing the Keyboard" on page 19).
8 Replace the hinge cover (see "Replacing the Hinge Cover" on page 16).
9 Replace the four screws that secure the display assembly to the computer

base.

10 Connect the antenna cables to the Mini-Card (see "Replacing the

Mini-Card" on page 37).

11 Replace the base cover (see "Replacing the Base Cover" on page 34).
12 Replace the battery (see "Replacing the Battery" on page 14).

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Display Bezel

Removing the Display Bezel

CAUTION:

The display bezel is extremely fragile. Be careful when removing it to

prevent damaging the bezel.

1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on

page 47).

3 Remove the four rubber pads that cover the screws that secure the display

bezel to the display cover.

Advertising