Dell Inspiron 1428 (Late 2009) - Manual (Page 50)

50 Display
13 Lift the display assembly off the computer.
Replacing the Display Assembly
1 Follow the procedures in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the two screws that
secure the display assembly to the computer base.
3 Route all the cables through the routing guides.
4 Connect the display cable, inverter board cable, and the camera cable to
their respective system board connectors.
5 Connect the microphone cables to their respective connectors.
1 display assembly 2 screws (2)
2
1