Dell Vostro 1400 (Mid 2007) - Manual (Page 42)

3. Place each of the new speakers in the appropriate speaker slot.
4. Replace the two M2.5 x 5-mm screws to secure the speakers to the base of the computer.
5. Carefully route the speaker cable through the cable guide on the base of the computer.
6. Connect the speaker cable to the system board.
7. Replace the system board (see Replacing the System Board ).
Back to Contents Page
NOTICE: Exercise care when handling or replacing the speakers.
NOTE: For proper placement, align the slots on the speakers with the screw-hole guide posts on the base of the computer.