Dell XPS 10 Tablet - Manual (Page 3)

Safety and Regulatory Information
You can find additional Safety Best Practices and information on REACH, Electromagnetic Compatibility (EMC),
Ergonomics, Transportation, and Tuners on the Regulatory Compliance page,
www.dell.com/regulatory_compliance .
WARNING: Use of controls, adjustments, procedures, connections, or signal types other than those specified
in your documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.
CAUTION: Dell products are not certified as medical electrical equipment, and are not intended for use in
close proximity to patients or in oxygen rich environments.
Dell products are not designed for use in hazardous environments. •
Dell products are not designed or intended for use in operating or calibrating medical devices. •
When setting up the equipment for use:
Place the equipment on a hard, level surface. •
Do not stack the equipment, place it in an enclosed space, or otherwise install it where it is subject to heated •
air. The equipment should have least 10.2 cm (4 inches) of clearance on all vented sides to permit the airflow
required for proper ventilation. Restricting airflow can damage the equipment or cause overheating.
If your product contains a tuner, see • www.dell.com/regulatory_compliance for safety instructions for tuners.
If your device includes a modem, the cable used with the modem should be manufactured with a minimum •
wire size of 26 American Wire Gauge (AWG) and an FCC compliant RJ11 modular plug.
WARNING: Do not operate your equipment with any cover(s) (including tablet covers, bezels, filler
brackets, front-panel inserts, and so on) removed.
Do not use your equipment in a wet environment. Protect equipment from liquid intrusion. •
Do not use damaged equipment, including exposed, frayed, or damaged power cords. •
Do not push any objects into the air vents or openings of your equipment. Doing so can cause fire or electric •
shock by shorting out interior components.
Do not allow your tablet or adapter to operate with the base resting directly on exposed skin for extended •
periods of time. The surface temperature of the base will rise during normal operation, particularly when AC
power is present. Allowing sustained contact with exposed skin can cause discomfort or burn.
To remove a tablet from all power sources, turn the tablet off, and disconnect the AC adapter from the •
electrical outlet.
When Working Inside Your Device
WARNING: Hazardous moving parts. Keep away
from the moving fan blades. Do not attempt to service the equipment yourself, •
except as explained in your Dell documentation or in
instructions otherwise provided to you by Dell. Always
follow installation and service instructions closely.
Internal components may become very warm •
during normal operation. Before touching any
internal components, allow time for them to cool.
Disconnect all cables from the tablet including the •
headphone cable before docking to the mobile
keyboard dock.
Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required •
voltage and frequency match the available power source.
If your device has a manual voltage-selection switch, your voltage-selection switch on the back panel –
must be manually set to operate at the correct operating voltage used in your location.
To prevent electric shock, plug the equipment power cables into properly grounded electrical outlets. If the •
equipment is provided with a 3-prong power cable, do not use adapter plugs that bypass the grounding
feature and do not remove the grounding feature from the plug or adapter.