Enabling the display settings for a tv – Dell Inspiron 700M User Manual
Page 34
34
Using CDs, DVDs, and Other Multimedia
www
.dell.com | support.dell.com
5 Plug the two RCA connectors on the other end of the audio cable in to the audio input
connectors on your TV or other audio device.
6 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on
the computer.
7 See "Enabling the Display Settings for a TV" on page 34 to ensure that the computer
recognizes and works properly with the TV.
Enabling the Display Settings for a TV
Integrated Video Controller
NOTE:
Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel.
2 Click Appearances and Themes.
3 Under or pick a Control Panel icon, click Display.
4 Click the Settings tab and click Advanced.
5 Click the Intel (R) Extreme Graphics tab.
6 Click Graphic Properties.
7 If you want to use only a TV without using the computer display or any other display options:
a
In the new window, click TV so that a red check mark appears directly on top of the TV icon.
b
Ensure that the settings are correct.
8 If you want to use a TV and the computer display at the same time:
a
In the new window, click Intel (R) Dual Display Clone and ensure that one of the
devices listed is a TV.
b
Click Device Settings.
c
In the new window, ensure that the display resolution settings are correct.
9 Click Apply to view the new settings.
10 Click OK to confirm the settings change.
11 Click Yes to keep the new settings.
12 Click OK.