Dell Inspiron 700M - Manual (Page 59)

Solving Problems
59
IEEE 1394 Device Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Keyboard Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTE:
Use the integrated keyboard when working in MS-DOS
®
mode or when running the
Dell Diagnostics or the system setup program. When you attach an external keyboard, the integrated
keyboard remains fully functional.
A REQUIRED . D L L FILE WAS NOT FOUND — The program that you are trying to open is missing an
essential file. Remove and then reinstall the program.
1 Click the Start button and click Control Panel.
2 Click Add or Remove Programs.
3 Select the program you want to remove.
4 Click Remove or Change/Remove and follow the prompts on the screen.
5 See the program documentation for installation instructions.
X : \ IS NOT ACCESSIBLE . T HE DEVICE IS NOT READY — Insert a disk into the drive and try again.
E NSURE THAT THE I E E E 1 3 9 4 DEVICE IS PROPERLY INSERTED INTO THE CONNECTOR
E NSURE THAT THE I E E E 1 3 9 4 DEVICE IS RECOGNIZED BY W INDOWS —
1 Click the Start button and click Control Panel.
2 Click Printers and Other Hardware.
If your IEEE 1394 device is listed, Windows recognizes the device.
I F YOU HAVE PROBLEMS WITH A D ELL - PROVIDED I E E E 1 3 9 4 DEVICE —
I F YOU HAVE PROBLEMS WITH AN I E E E 1 3 9 4 DEVICE NOT PROVIDED BY D ELL —
Contact Dell (see page 89) or the IEEE 1394 device manufacturer.