Front panel user interface, Power button, Leds – Dell PowerEdge C5230 User Manual
Page 15

13
Front Panel User Interface
The BMC provides control panel interface functionality including indicators
(fault, status, and ID LEDs) and buttons (power/ID).
Power Button
The power button turns the device on and off.
LEDs
BMC Heartbeat LED
The green LED provides an easy way to indicate that BMC is now enabled.
ID LED
A blinking LED indicates the Chassis Identify command has been accepted.
System Status LED
There is a dual-color LED to show the system status. The BMC turns the
LED off after all event logs are cleared.
The behavior of Status LED and ID LED is listed in Table 1-5.
Table 1-5. LED Status
LED
Color Status
Occurrence
Note
Status LED Amber Blinking See "Blinking Fault
Off
Normal status
Power LED Green Solid On Power On
The power LED status is
controlled by BIOS.
Off
Power Off