Dell PowerEdge C5230 - Manual (Page 49)

47
Procedure:
1 In the Alert Policy Tab, select the slot for which you have to configure the
Alert policy. That is, In the Event Filter Entry Page, if you have chosen
Alert Policy number as 4, you have to configure the 4th slot (the slot with
Policy Number 4) in the Alert Policy Tab.
2 Select the slot and click Add to open the Add Alert Policy Entry Page as
shown in the screenshot below.
3 Policy Entry # is a read only field.
4 Select the Policy Number from the list.
5 In the Policy Configuration field, check Enable if you wish to enable the
policy settings.
6 In the Policy Set field, choose any of the Policy set from the list.
7 In the Channel Number field, choose particular channel from the
available channel list.
8 In the Destination Selector field, choose particular destination from the
configured destination list.
NOTE: LAN Destination has to be configured under:
Configuration > PEF > LAN Destination. That is if you select the number 4 for
destination selector in Alert Policy Entry page, then you have to configure the 4th
slot (LAN Destination Number 4) in the LAN Destination tab.
9 In the Alert String field, enable the check box if the Alert policy entry is
Event Specific.
10 In the Alert String Key field, choose any one value that is used to look up
the Alert String to send for this Alert Policy entry.
11 Click Add to save the new alert policy and return to Alert Policy list.
12 Click Cancel to cancel the modification and return to Alert Policy list.
13 In the Alert Policy list, to modify a configuration, select the slot to be
modified and click Modify.