Dell PowerEdge C5230 - Manual (Page 34)

32
Procedure:
1 Select the LAN Interface from the drop down list.
2 Check Enable to enable the LAN Settings.
3 In IPv4 Configuration, enable Use DHCP to Obtain an IP address
automatically to dynamically configure IPv4 address using DHCP.
4 If the field is disabled, enter the IPv4 Address, Subnet Mask and Default
Gateway in the respective fields.
5 In IPv6 Configuration, if you wish to enable the IPv6 settings, check
Enable.
6 If the IPv6 setting is enabled, enable or disable the option Use DHCP for
obtaining the IP address automatically.
7 If the field is disabled, enter the IPv6 Address, Subnet Prefix length and
Default Gateway in the given field.
8 In VLAN Configuration, if you wish to enable the VLAN settings, check
Enable.
9 Enter the VLAN ID in the specified field.
10 Enter the VLAN Priority in the specified field.
11 Click Save to save the entries.
12 Click Reset if you want to reset the modified changes.
VLAN Priority The priority for VLAN configuration.
• Value ranges from 1 to 7.
• 7 is the highest priority for VLAN.
Save To save the entries.
Reset To Reset the modified changes.
Table 1-16. Network Settings
Item Description