Dell Inspiron 630m - Manual (Page 20)

20 Internal Card With Bluetooth® Wireless Technology
Replacing the Bluetooth Module
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.
2 Follow the instructions in "Removing the Bluetooth Module" on page 17, as applicable.
3 Connect the new Bluetooth module to the connector cable.
4 Place the Bluetooth module in its compartment.
5 Replace the M2 x 3-mm screw to secure the Bluetooth module to the base of the computer.
6 Replace the modem/Mini PCI/wireless cover and tighten the screws.
1 Bluetooth module 2 Bluetooth module connector 3 Bluetooth connector cable
2 3
1