Palm rest, Removing the palm rest, 12 palm rest – Dell Inspiron 630m User Manual
Page 65
Palm Rest
65
12
Palm Rest
Removing the Palm Rest
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.
2 Remove the
optical drive (see "Removing the Optical Drive" on page 25).
3 Remove the
hinge cover (see "Removing the Hinge Cover" on page 41).
4 Remove the
keyboard (see "Removing the Keyboard" on page 43).
5 Remove the
display assembly (see "Removing the Display Assembly" on page 55).
6 Remove the microprocessor thermal-cooling assembly (see "Removing the Microprocessor
Thermal-Cooling Assembly" on page 71).
7 Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and
set it aside.