Dell Inspiron 510m - Manual (Page 92)

92
Adding and Replacing Parts
www
.dell.com | support.dell.com
CAUTION:
Before working inside your computer, read the safety instructions in the Product
Information Guide.
1 Follow the procedures in "Before You Begin" on page 87.
2 Turn the computer over.
3 Loosen the captive screw in the cover, and remove the cover.
4 If a Mini PCI card is not already installed, go to step 5. If you are replacing a Mini PCI card,
remove the existing card:
a Disconnect the Mini PCI card from any attached cables.
b Release the Mini PCI card by spreading the metal securing tabs until the card pops up
slightly.
c Lift the Mini PCI card out of its connector.
NOTICE:
To avoid damaging the Mini PCI card, never place cables on top of or under the card.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
5 Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card
into the connector until you hear a click.
6 Connect the antenna cables to the Mini PCI card.
D7898bk2.book Page 92 Friday, April 29, 2005 9:39 AM