Dell 2408WFP Monitor - Manual (Page 12)

USB Ports
l 1 upstream - rear
l 4 downstream - 2 on rear; 2 on left side
Card Reader Specifications
Overview
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
l The Flash Memory Card Reader is automatically recognized by Windows® 2000, XP and Vista.
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
l All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
Features
The Flash Memory Card Reader has the following features:
l Supports Windows 2000, XP and Vista operating systems
l No Windows 9X support from Dell
l Mass Storage Class device (No drivers are required under Windows 2000, XP and Vista)
l USB-IF certification
l Supports various memory card media
The following table lists the slot to support what kind of memory card:
Maximum Card Capacity Supported by the 2408WFP card reader
4 GND
NOTE: USB 2.0 capability requires 2.0 capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you switch
the monitor off and then on, the attached peripherals may take a few seconds to resume normal functionality.
Slot Number Flash memory cards type
1 Compact Flash type I/II Card (CF I/II)/CF form factor ATA hard drives to USB 2.0 bus
2 xD-Picture Card
Memory Stick Card (MS)/High Speed Memory Stick (HSMS)/Memory Stick Pro Card (MS
PRO)/Memory Stick Duo (with Adapter)
Secure Digital Card (SD)/Mini Secure Digital (with Adapter)/TransFlash Card (with
Adapter)
MultiMedia Card (MMC)/Reduced Size MultiMedia Card (with Adapter)
Card type Support Specification Memory Card
Spec Version Max. capacity
CF Compact Flash Specification 2.0 128GB
MS Memory Stick Standard Format Specification 1.40-00 128MB
MSPRO Memory Stick Pro Standard Format Specifications 1.01-01 32GB