Replacing the display assembly – Dell Inspiron Mini 10 (1010, Early 2009) User Manual
Page 17
13.
Lift and remove the display assembly from the computer base.
Replacing the Display Assembly
1.
Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
2.
Connect the display cable to the system board connector.
3.
Route the Mini-Card cables and connect them to the Mini-Cards, if applicable (see
Replacing the Mini-Card
).
4.
Connect the TV tuner card cables to its connectors.
5.
Replace the 3-in-1 Media Card Reader (see
Replacing the Media Card Reader
).
6.
Replace the palm rest bracket (see
Replacing the Palm Rest Bracket
).
7.
Replace the hard drive (see
Replacing the Hard Drive
).
8.
Replace the palm rest (see
Replacing the Palm Rest
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
screws (2)
2
display assembly