Palm rest, Removing the palm rest – Dell Inspiron Mini 10 (1010, Early 2009) User Manual
Page 27
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 1010 Service Manual
Removing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove keyboard (see
Removing the Keyboard
).
4.
Remove the five screws from the bottom of the computer base.
5.
Release the lock and disconnect the touch pad cable from the system board connector.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
palm rest
2
touch pad cable connector
CAUTION:
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.