Dell Inspiron Mini 10 (1010, Early 2009) - Manual (Page 41)

11. Remove the screw that secures the TV tuner connector board.
12. Lift the TV tuner connector board off the computer base.
Replacing the TV Tuner Card
1. Remove the new TV tuner card from its packing.
2. Insert the TV tuner card at a 45-degree angle into the appropriate system board connector.
3. Press the other end of the TV tuner card down into the slot on the system board.
4. Replace the two screws that secure the TV tuner card to the system board.
5. Place the TV tuner connector board on the computer base and replace the screw that secures the TV tuner connector board to the computer base.
6. Connect the three TV tuner card cables to the connectors on the TV tuner card
7. Replace the 3-in-1 Media Card Reader (see Replacing the Media Card Reader ).
8. Replace the palm rest bracket (see Replacing the Palm Rest Bracket ).
9. Replace the hard drive (see Replacing the Hard Drive ).
10. Replace the palm rest (see Replacing the Palm Rest ).
11. Replace the keyboard (see Replacing the Keyboard ).
12. Replace the battery (see Replacing the Battery ).
Back to Contents Page
1 screw 2 TV tuner connector board 3 TV tuner connector cables
CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.