Dell 540 Photo Printer - Manual (Page 25)

Default Country Was Not Set -
If you did not select the default country during the setup process:
Click Menu Printer Settings Country. 1.
Use the navigation arrow buttons until the desired country appears on the display,
then press . 2.
Use the navigation arrows and buttons to set your country as the default. 3.
Camera and printer do not communicate.
Make sure camera is in the correct file transfer mode. See your camera Owner's Manual.
General Problems
Anytime your printer has a problem, make sure:
Your printer is on.
The photo paper is loaded correctly. For help, see
Loading the Photo Paper .
Unplug the power supply from the electrical outlet. Reconnect the power supply (see your
Setup Diagram). Turn the power on.
If your printer is not attached to a computer, make sure:
You read and follow any messages on the LCD.
The power supply is plugged into your printer and an electrical outlet.
If your printer is attached to a computer, make sure:
The USB cable is securely attached to your computer and to your printer. For help, see the
Setting Up Your Printer poster.
Both your computer and your printer are on.
The Dell Photo Printer 540 is the selected printer. (It should not be set as the default if
there is another printer connected.)
Restart your computer.
Error Messages
If an error occurs, the Error light glows amber and an error message is displayed on the printer LCD. Follow
the directions on the LCD to resolve the problem.
Printing Problems