Dell Latitude C800 - Manual (Page 98)

The two track stick buttons, located between the touch pad and the space bar on the keyboard, correspond to the left and right buttons on a
mouse.
l
To move the cursor, apply pressure to the track stick with your index finger. Press up or down to move the cursor to the top or bottom of the
display screen. Press left or right to move the cursor to the left or right of the display screen.
l
To select an object, tap once on the track stick or use your thumb to press the left track stick button.
l To select and move (or drag) an object, position the cursor on the object. Then press and hold the left track stick button. Leave your thumb on
the button and move the selected object by pressing the track stick in the desired direction.
l To double-click an object, position the cursor on the object and then tap the left track stick button or the track stick itself twice. The track stick
functions much like the touch pad in that it allows you to use buttons for mouse functions or the pointing device itself.
Customizing the DualPoint Integrated Pointing Device
1. Click the Start button, point to Settings, and click Control Panel. (If you are running Windows 2000, double-click Control Panel.)
2. Double-click the Mouse icon and click the Touch tab on the Mouse Properties window.
3. In the dropdown menu, choose either the touch pad or the pointing stick (track stick) and click Apply.
4. Click OK to save the settings and close the window.
You can also right-click the touch pad icon on the taskbar and click Touch Pad Properties to open the Mouse Properties window.
Click in the Disable this Device box to disable the selected touch pad or track stick settings. If your computer is docked with a mouse, the touch
pad and track stick settings are automatically disabled.
Changing the Track Stick Cap
Your computer came with additional track stick caps. You may need to change the track stick cap if it wears down from prolonged use.
1. Pull the cap off the track stick.
2. Align a new cap over the square track stick post and gently press the cap down onto the post.
3. Test the track stick to ensure that the cap is seated properly.
PC Cards